Upass Material Technology (Shanghai) Co.,Ltd.
Focus on polymer films.
Add to Cart
| Data Sheet | | | | |||
| Item | | Unit | Performance Index | |||
| Thickness | | mm | 0.09-0.265 | |||
| Width | | mm | 900-1200 | |||
| Sleeve ID | | mm | 76 | |||
| Tensile Properties | Tensile Strength | Mpa | ≥50 | |||
| | Maximum Tension | (N/50mm) | ≥300 | |||
| | Elongation at Maximum Tension | % | ≥200 | |||
| | Elongation at Break | % | ≥250 | |||
| Nail Rod Tear Strength | | N | ≥60 | |||
| Dimensional Stability at 90 ℃ | | % | ≤1.5% | |||
| Tear Strength | | N | ≥25 | |||
| Heat Resistance(70 ℃, 24h) | | ℃ | After applying asphalt, the maximum curling of the polymer film or tire base edge shall not exceed 1/4 of the edge length | |||
| Low Temperature Flexibility | | ℃ | -30 ℃, no cracks, no layering | |||
| Aging Test (70 ℃, 7days) | Appearance | | No bubbles, no layering | |||
| | Tensile Retention Rate | % | ≥80 | |||
| | Elongation Retention Rate | % | ≥200 | |||
| Q1: Are you trading company or manufacturer ? |
| A1: We are manufacturer. |
| Q2: Do you provide samples ? is it free or extra ? |
| A2: Yes, we could offer A4 sample for free charge but if you need in roll,we can offer 100-200m/roll for free, but shipping cost need you to paid. |
| Q3: How long is your delivery time? |
| A3: Depends on your quantity. Generally it is about 30 days for 20GP container. |
| Q4: How to pay for your goods? |
| A4: By L/C, by T/T (30% deposit before production, 70% balance before loading). |