Upass Material Technology (Shanghai) Co.,Ltd.
Focus on polymer films.
Add to Cart
Data Sheet | ||||||
Item | Unit | Performance Index | ||||
Thickness | mm | 0.09-0.265 | ||||
Width | mm | 900-1200 | ||||
Sleeve ID | mm | 76 | ||||
Tensile Properties | Tensile Strength | Mpa | ≥50 | |||
Maximum Tension | (N/50mm) | ≥250 | ||||
Elongation at Maximum Tension | % | ≥250 | ||||
Elongation at Break | % | ≥250 | ||||
Nail Rod Tear Strength | N | ≥60 | ||||
Dimensional Stability at 90 ℃ | % | ≤1.5% | ||||
Tear Strength | N | ≥25 | ||||
Heat Resistance(70 ℃, 24h) | ℃ | After applying asphalt, the maximum curling of the polymer film or tire base edge shall not exceed 1/4 of the edge length | ||||
Low Temperature Flexibility | ℃ | -30 ℃, no cracks, no layering | ||||
Aging Test (70 ℃, 7days) | Appearance | No bubbles, no layering | ||||
Tensile Retention Rate | % | ≥90 | ||||
Elongation Retention Rate | % | ≥80 | ||||
Q1: Are you trading company or manufacturer ? |
A1: We are manufacturer. |
Q2: Do you provide samples ? is it free or extra ? |
A2: Yes, we could offer A4 sample for free charge but if you need in roll,we can offer 100-200m/roll for free, but shipping cost need you to paid. |
Q3: How long is your delivery time? |
A3: Depends on your quantity. Generally it is about 30 days for 20GP container. |
Q4: How to pay for your goods? |
A4: By L/C, by T/T (30% deposit before production, 70% balance before loading). |