Upass Material Technology (Shanghai) Co.,Ltd.
Focus on polymer films.
Add to Cart
| HDPE Siliconized Release Film For Butyl Tapes Silicon type: Solvent Silicon
A release liner is a pleastic release film which made of PE, PP or PET film as carrier, silicon coated on either one or two-sided releases options.
Our HDPE Siliconized Release Film For Butyl Tapes, it is special design for Butyl Tapes, cause Butyl is much sticker than normal glue or bitumen, it requires a high performance release liner to make sure easy to release and keep sticker when construction.
|
Advantages:
| 1. Easy to construction, UV curing type |
| 2. Low release force, easy peel off when remove the release film |
| 3. High residual adhesiveness rate(≥90%) to prevent the influence of silicon transfer on products |
| 4. Environmental Production technology of solvent and solvent-free products |
| 5. Environmentally Friendly. Can be recycling |
Parameter:
| Products Name | HDPE Siliconized Release Film For Butyl Tapes | Spec. | 0.05mm*1040 | ||
| Detection Methed | Q/TPXP 1-2013 | Date | 2021.3.3 | ||
| NO. | Item | Factory Requirement | Detection Value | Individual Determination | |
| 1 | Appearance | No bubbles, no stains, no damage, no impurities | Qualified | Qualified | |
| 2 | Spec. | Width | 1040±10mm | 1041 | Qualified |
| Thickness | 0.05±0.005mm | 0.051 | Qualified | ||
| 3 | Max.F (N/50mm) | TD (CD) | ≥30 | 58 | Qualified |
| MD | ≥30 | 92 | Qualified | ||
| 4 | Elongation (%) | TD (CD) | ≥150 | 764 | Qualified |
| MD | ≥200 | 528 | Qualified | ||
| 5 | Tensile Strength | TD (CD) | ≥16 | 23 | Qualified |
| MD | ≥18 | 36 | Qualified | ||
| 6 | Release Force (N/25mm) | 3-8g | 0.072 | Qualified | |
| 7 | Subsequent Adhesion (%) | Grey side≥90 | 92 | Qualified | |
Application:
Butyl Tapes
